OBD GPS Tracker TK206

OBD GPS Tracker TK206 For Auto, scooter and motorcycle

1. Technical parameter

1.GSM850/900/1800/1900 Quad band

2.GPRS: Class12, TCP/IP

3.Working Voltage:9-50V DC

4.Working current:22mA (12vDC)

5.Working current:12mA (24vDC)

6.GPS locating time:Cold start about 38s(Open sky) Warm start abut 32s Hot startabout 2s(Open sky)

7.GPS Precision:10m

8.Working temperature:-20-+70'c

9.Working humidity:20%-80%RH

10?.Measurement: 71*49*24mm

2.Device status indicators:

2.1 Connect DC 9-24V power supply and the red LED will light continuously.

2.2 The green LED glistens when searching the GPS signals. When GPS works,the LED lights continuously.

2.3 The intermediate blue LED (GSM signal state)GSM signal is normal, blue LED light long bright. No GSM signal, the blue LEDflashes?0.2 sec/2 sec?.GPS LED not fixed, long bright. Positioning flashes?0.2 sec/2 sec? ?Power LED: long bright;

3.Installation

3.1 Preparation for the installation

3.1.1 Product Check. Open the packing box and check the device‘s model and accessories.If the model is wrong or the accessories not complete, please contact the dealer.

3.1.2 Choose SIM card. Please insert a SIM card to the device. Please take dealer’s adviceas reference.

3.1.3 SIM card installation. Discharge the cover of the device and uncover the SIM cardholder. Then insert the SIM card and cover SIM card holder (as follows).

3.1.4 Put back the front cover and screw it up.

3.1.5 Connect the device to the 9-50Vpower supply.?the red LED constant glow?

3.1.6 Install the device in the hidden place of the car?The SIM card must be with GPRS function and enough deposit. If your SIM card needinput PIN when power on, please cancel it.